We are now a NUHN dealer! View Product Line ›

All Products

Nuhn 12″ Lagoon Pump Header Series

New 2021 12" Nuhn Lagoon Pump - 48' length!

NEW! 48' x 12" Nuhn Lagoon Pump.
- Complete with remote.
- Sand Shield and inlet chopper.

Call today for pricing!

New CFS Frac Tank

New CFS Frac Tank

New CFS Built Frac Tank
20,000 Gallons
3-3/8" spindles and 10 bolt Hubs
425/65 22.5 wheels
3 point hitch with 7,000 lbs vertical lift
Pintle hitch
Reinforced interior walls
Suction port for easy hook up to a power unit
Light Kit for road travel
Rear doors open for easy clean out

List Price $27,500.00
Sales Price $19,500.00

This unit has been SOLD!

Demo CFS Hose Humper

CFS Hose Humper - Demo Unit

CFS Built Hose Humper
Demo Unit
Sales Price of $10,400.00
Available now for delivery!

Call our Sales Department for Details!

Farm Show Peecon TMR Mixer

2019 Farm Show Special - 2 Units to chose from!!!!

NYS Farm Show Unit
Peecon 1100 Triple Auger

Call our Sales Department for Details

Demo Peecon TMR Mixers

Peecon 1250 Twin Vertical Auger

2019 Demo Unit
List Price $113,840.00
Sales Price $95,200.00

Available now for on Farm Demo!

You can put this mixer to work at a low monthly rate starting at $1,713.66

Call our Sales Department for details!

New Doda AFI 35L Pumps

New Doda AFI 35L

-Models currently in stock!
-Pricing starting at $7,765.00
-You can put this machine to work starting at a low monthly rate of $152.64
-Available for delivery today!

Call our Sales Department for details!

New Doda AFI35 HD Pumps

New Doda AFI 35HD

-Models currently in stock!
-Pricing starting at $11,300.00
-You can put this machine to work starting at a low monthly rate of $224.74
-Available today for delivery!

Call our Sales Department for details!

Used Frac Tank

Used Frac Tank

- 5th Wheel Frac Tank
- 8' x 40'
- 6" Connections

Please contact our sales department for more details.

Mainline Hoses


Mandals Superman HVT Mainline / Supply Hose

Design
Thermoplastic polyether based polyurethane (TPU)
State of the art “through the weave” extrusion technology.
Heavily reinforced and stabilized weave, using high tenacity polyester filament yarns.
Excellent adhesion between cover/lining and the weave.

Advantages
Full diameter recovery after pressure release.
Excellent hydrolysis and fungus resistance.
Resistance to a wide range of chemicals.
Temperature range -50 to 75 ºC (pure water)
Excellent UV, Ozone and weathering resistance.

Features
Lightweight and easy to deploy
Ultimate abrasion and puncture resistance
High diameter and extension stability
Minimum snaking of pressurized hose

Available in 660' lengths or cut lengths (subject to availability).

Nitrile Rubber Mainline also available upon request.

Mandals Superman HVT

Pressure: 250 psi
Burst: 650 psi
End Tensile Strength: 44,000 lbs.
Wall Thickness: 0.15"
Dry Weight: 1.34 lbs./ft.

Mandals Superman HVT

Pressure: 200 psi
Burst: 610 psi
End Tensile Strength: 81,500 lbs.
Wall Thickness: 0.17"
Dry Weight: 2.15 lbs./ft.

Mandals Superman HVT

Pressure: 200 psi
Burst: 520 psi
End Tensile Strength: 101,200 lbs.
Wall Thickness: 0.17"
Dry Weight: 2.85 lbs./ft.

Honey Badger

HONEY BADGER Pump Units

The Honey Badger brings world-class pumping capabilities to your liquid transfer operation, combining an extended reach with the high-efficiency of a Cornell submersible feeder pump. With an innovative design that draws on Puck’s years of liquid-pumping experience, the Honey Badger sets up in minutes, is highly energy efficient and has flow rates of over 3,000 gallons per minute.

FEATURES

-Fits all liquid storage types
-Comes equipped with LightSpeed IQ technology
-LightSpeed Pro ready for in-depth pump control and monitoring
-3,000+ gallon per minute pump capacities

VERSATILE DESIGN

No matter what your operation looks like, the Honey Badger can help. It works for all kinds of liquid storage, seamlessly adapting to your operation.

SIMPLE SETUP

Three knuckle points bring you a high level of maneuverability, and the remote-controlled hydraulic boom makes every job more manageable.

HIGH FLOW, ENERGY EFFICIENT

The Honey Badger’s Cornell Submersible Feeder Pump saves on energy but doesn’t sacrifice power — bringing you higher flow rates at a lower cost. Plus, the Honey Badger pumps more gallons per gallon of diesel fuel consumed, further maximizing your investment.

UNMATCHED PUMP CONTROL

Built into the Honey Badger, LightSpeed IQ works even without LightSpeed Pro. Set flow, pressures and automatic responses with auto-throttle, and easily adjust your feeder and primary pump for the best performance.

Kifco Pumps


Kifco offers a wide range of pump options to accomodate our Water-Reels. Our Booster Pumps provide additional pressure when needed to maximize your traveler's performance. Our primary pumps include air-cooled and engine driven and built to match many B-Series and Ag-Rain Reels. Kifco packages are EPA emissions compliant for irrigation use and our standard models are specifically sized to match our Water-Reels. Custom built packages are also available for most any application. Our Slurry and Waste-Water Pumps are custom built packages that can be ordered for most any application. They are single-stage, centrifugal pumps with mechanical seals and integrated gearboxes. Our PTO Pumps are driven from your tractor's PTO shaft with maximum output of 540 to 1000 rpms. They are offered as bare pumps, mounted on a cart or 3-point frame or can be ordered fully fitted.

Kifco B-Series


Kifco B-Series Water-Reels are a versatile solution to your sports field, horse arena, cemetery, park, pasture, garden or residential irrigation or other small acreage irrigation needs. B-Series travelers come in a wide variety of lengths and tube diameters and can irrigate an area as small as an indoor horse arena or as large as a 30 acre pasture.

All B-Series models either retract using a highly efficient water-powered turbine (T Models) or a simple bellows drive (B Models) or a gas-powered engine drive or an electric motor (E Models) based on your particular needs. Kifco is the first and only manufacturer to provide a machine specifically designed to cool, rinse and condition synthetic turf fields before or during a game


Visit Our Irrigation site for Full description on our Kifco products

Visit CFS Irrigation to Learn More!

DariTech One Shot


Super ME Pumps


The ME electric motor pumps are ideal for hog, dairy, or beef reception pits, water, sewage, syrup – the list goes on! Pumps can be used to agitate, transfer or to fill hauling units. Parts in stock in our USA facility to build pumps in various lengths from 4’-20’, additional lengths available upon request. The manure pumps from our Auburn company can be run with motors from 5hp – 50hp 3phase or single phase. c-face electric motors eliminate belt & pulley problems. Hot dipped galvanizing is standard – stainless steel components are available upon request.

Cast iron impeller housing with venturi design & adjustable pressure plate creates high pressure to move the slurry as far or fast as you need.

The patented manure chopping system available from our Auburn company can handle slurries with higher concentration of bedding & solids. Rotating cutter blade & counter blades are made of hardened steel alloy to chop harder & longer without needing to be replaced.

Agitation nozzle has a 320degree horizontal & 90degree vertical range of motion.

Pumps can be mounted & secured in several different ways with wall/floor mount bracket or on a 2 wheel trailer which allows easy movement between different pit access holes.

-5 HP Electric motor
-C-Face coupler
-80MM Delivery tube
-Hot dipped galvanized components
-Depth sizes available 6', 8', 10', 12', 13'
-Adjustable wall / floor bracket

-10-15 HP Electric motor
-C-Face coupler
-100MM Delivery tube
-Hot dipped galvanized components
-Depth sizes available 6', 8', 10', 12', 13'
-2 piece drive system
-Adjustable agitation nozzle
-Adjustable wall / floor bracket

-10-15 HP Electric motor
-20-40 HP Electric motor
-C-Face coupler
-120MM Delivery tube
-Hot dipped galvanized components
-Depth sizes available 6', 8', 10', 12', 13'
-2 piece drive system
-Adjustable agitation nozzle
-Adjustable wall / floor bracket

Super PTO Chopper Pump


CFS in Auburn offers Super/PTO chopper pumps with dual chopping features that assure the waste will be properly chopped leading to fewer plug-ups in the field. Available in standard lengths of 6’, 8’, 10’, 12’ with additional lengths upon request. Can fit 540 or 100 RPM.

Pump housing with nodular cast iron impeller & venture design accelerate slurry movement, the patented chopping system handles slurry with larger concentrations of bedding & solids, chopping blades made of hardened steel alloy, nodular cast iron impeller & adjustable pressure plate creates high pressure that can power up to 12,000 cuts per minute.

• Discharge tube size’s come in 6” or 8”.
• SUPER Pumps can fit into pit holes as small as 2’ x 2’
• Carriage with hydraulic motor & stainless steel cable on a winch and simple 2 point hook up makes transfer from pit to pit very quick & easy.

• Rotating chopping feature and adjustable pressure plate assures proper conditioning
• The unique pump housing and volute design accelerate product moving through the housing and prevent clogging
• Operates with minimal shaft deflection and increased performance of the mechanical seals and pump bearings
• Oil bath driveline with separate pump housing stainless steel shaft
• Stainless steel or nodular cast iron housing, no welded components

• Rotating chopping feature and adjustable pressure plate assures proper conditioning
• The unique pump housing and volute design accelerate product moving through the housing and prevent clogging
• Operates with minimal shaft deflection and increased performance of the mechanical seals and pump bearings
• Oil bath driveline with separate pump housing stainless steel shaft
• Stainless steel or nodular cast iron housing, no welded components

Doda AFI Pump


The AFI pump is a high-pressure chopper pump available from CFS in Auburn that can be mounted on a tractor or connected to a direct power source. Vanadium and manganese alloy chopper blades chop the slurry prior to pumping, allowing for fuel-efficient, block free operation. An oil cooling system keeps the gearbox cool even in heavy and prolonged conditions resulting in the most efficient, low maintenance agricultural pressure pump on the market.

Doda USA Movred


Doda manufactures a variety of propeller mixers for the most challenging applications. The unique self-cleaning propeller on the manure agitators offered by CFS in Auburn is designed for where the treated mass must be kept in a homogeneous state without dispersing the characteristic gasses used for biogas.

CFS Auger Refurbishment


Due to the increased need to produce dry material from screw presses and increasing costs, CFS Inc. is proud to offer an alternative to purchasing a new auger. When an auger helix is bent or worn, our fully functional fabrication shop can refurbish your old augers. Our skilled auger refurbishing team can rebuild flights, drive splines, and hot-dip plate many of the leading manufacturer's augers.

Custom Built Hose Humper


Doda Vertical Chopper Pump – 10’ 10HP


Pump housing with nodular cast iron impeller & venture design accelerates slurry movement. The patented manure chopping system from our Auburn company handles slurry with larger concentrations of bedding & solids, chopping blades made of hardened steel alloy, nodular cast iron impeller & adjustable pressure plate creates pressure.

Length: 10’
Horsepower: 10
Discharge tube: 4”

Technical Features

• Rotating chopping feature and adjustable pressure plate assures proper conditioning
• The unique pump housing and volute design accelerate product moving through the housing and prevent clogging
• Operates with minimal shaft deflection and increased performance of the mechanical seals and pump bearings
• Oil bath driveline with separate pump housing stainless steel shaft
• Stainless steel or nodular cast iron housing, no welded components

Contact our Sales Department for pricing!

Farm Duty Motors


We offer a full line of single and three phase Farm Duty motors for use in a wide variety of agricultural and industrial applications. These belt driven motors can be used for sanders, pulleys, and assembly lines, as well as fans and air pumps.

Our quality Farm Duty motors are reliable so you won’t be left looking for power. We also have the capability of building custom designs for any specialized application you may have.

Contact our shop office for more information (315) 224-0444

WEG W22


High performance with maximum energy efficiency, this is the goal of the new WEG electric motor. High efficiency and Low cost of Ownership throughout the entire motor lifetime have been the basis for the W22 development. A design created to maximize performance and energy savings. WEG’s W22 cast iron platform has an improved cooling system and solid feet for cooler operation and reduced vibration and noise, extending the life of the motor.

FEATURES

• 1 – 600 Horsepower motors and above
• 50/60 Hz rated
• 1.25 service factor in all ratings
• Optimized ventilation system
• Solid base for reduced vibration levels
• Frames 447T
• NPT Threaded terminal box
• Cast Iron Frames
• Gasketed conduit box
• Stainless Steel nameplate

New cooling system

Redesigned to provide improved air flow through all motor frames keeping low operational temperatures and assuring reliability and extended lifetime. The aerodynamic design of the fan cover increases effective airflow, thus minimizing losses due to the recirculation of air between fan and fan cover. The fan was designed to provide strength and reduced noise level. Motor terminal box and eyebolts were repositioned on larger frames to allow better airflow.

Terminal box

Increased internal space making connections more accessible to the user resulting in an easier cable handling and connection. Terminal box can be mounted on top, left or right site of the motor using the same frame on the 447T and larger motors. Top mounting is optional on smaller frames.

Frame

Motor feet are solid providing a more resistant structure against vibration. The frame design has points that can be used as provisions for vibration sensors as a standard feature.

CFS Risers


• 8” 304 stainless steel J-risers (shown to the left).
• 8” 8-bolt stainless steel flange for easy bolt-on adaption to pipe—PVC or steel.
• 8” stainless steel male drag end connection.
• Risers built with 304 Stainless Steel Schedule 10 pipe.

Also available:
• 6” Stainless Steel Riser.
• “Z” instead of “J” style.

CFS Pipe


We offer bulk PVC pipe by the truckload.

For Pricing and Availability
Call (315) 224-0444

CFS Frac Tank


• 20,000 gal. frac tank.
• (2) – 3000 psi hyd. Cylinders.
• 3-3/8” spindles and 10 bolt hubs.
• 425/65 22.5 wheels.
• 3 point hitch with 7000 lbs vert. lift and 40,000 lb gross trailer weight.
• Pintle hitch.
• Reinforced walls on interior.
• 2 Standard fill openings
• Suction port for easy hook up to Power Unit.
• Light kit for traveling on road.
• Doors in rear that will open to clean out any build up.

Options:

• Open Top Tank
• Hydraulic Load Out Pump
• 8” or 6” Load Out Boom

A range of equipment is needed in agricultural operations, especially in regular fertilizer applications and diesel fuel storage. Frac tanks are helpful for temporary storage of liquids across a number of agricultural jobs. Depending on your specific operation, Cuff Farm Services will help you select the Frac tank that will deliver the best result in the most cost-effective way.

Dragline Hose


Drag Hose

Drag hose is an integral part of your drag line system. Mandals' Dragman series of high quality flexible layflat hoses are designed for the rigors of the job.

Mandals Dragman Extra

FEATURES
Designed for umbilical drag system used for distribution of slurryand manure in agricultural fields.
Engineered with extreme tensile strength and abrasion properties.
High tenacity filament polyester yarn.

Design
Covered and lined with Thermoplastic Polyurethane (TPU).
Extrusion through the Weave Technology - ensuring ultimate adhesion between TPU and the weave.
Heavily reinforced weave ensuring required longitudinal Tensile strength and Burst pressure.

Advantages
Ultimate tensile strength and adhesion level polymer to weave.
Enhanced abrasion resistance.
High diameter and extension stability.
Low kink radius.
High puncture resistance.
Temperature range -50ºC to +75ºC (pure water) (-58 ºF to +167 ºF).
Standard lengths depending on diameter.
Excellent UV and weathering resistance.

Size Options

Inner diameter: 5", 5-1/2", 6", 7", and 8".
Lengths: 660', 990', and 1,320'.
Subject to availability

Mandals Dragman Extra
Pressure:
217 psi
Burst: 435psi
Tensile Strength: 48,300 lbs.
Weight: 1.31 lbs./ft.

Mandals Dragman Extra
Pressure:
217 psi
Burst: 435psi
Tensile Strength: 56,400 lbs.
Weight: 1.44 lbs./ft.

Mandals Dragman Extra
Pressure:
217 psi
Burst: 435 psi
Tensile Strength: 60,400 lbs.
Weight: 1.54 lbs./ft.

Mandals Dragman Extra
Pressure:
217 psi
Burst: 435 psi
Tensile Strength: 81,400 lbs.
Weight: 1.84 lbs./ft.

Mandals Dragman Extra
Pressure:
217 psi
Burst: 435 psi
Tensile Strength: 102,800 lbs.
Weight: 2.21 lbs./ft.

Tigerflex WST Series


Heavy Duty Reinforced Suction Hose
Available in 4” / 6” / 8”
Also ask about our Blue Water and HG Tigerflex hoses for your injection tool bars.

EPDM Hose


150 PSI Rated
Available in 4” / 6”

Lay-Flat Hoses


Variety of sizes and ratings in stock:
Available in 4” / 5” / 6” / 8” / 10”

Kifco Water-Reels


Kifco Water-Reels are the premier hard hose travelers in the irrigation industry. Water-Reels are used around the world for portable irrigation, dust suppression, leaching, & de-watering. Our engine drive units are ideal for redistributing wastewater with up to 3% solids.

Increase crop yields and irrigate hard to reach areas with a Kifco irrigation traveler. Water-Reels are an easy set-and-go system that can water acres in just a few unattended passes.

Cuff Farm Services carries a variety of sizes and options to fulfill all your irrigation needs.

Stainless Chain Heavy Duty Conveyor


Poly Features:

• No Peeling or Fading
• No Rust
• No Decay
• Smooth, Quiet Operation
• Quality Components and Workmanship
• Drive units come mounted; Idler ends come installed

Dimensions:

• Overall Width 19 1/2″ or 25 1/2″
• Trough Width 18″ or 24″ or Trough Width 36″ for Maximum Capacity
• Bottom Delivery Height 9 1/4″
• Top Delivery Height 13 3/4″
• Poly Sides are 5/8″ Thick
• Poly Floor is 5/8″ Thick

CFS provides new installations as well as upgraded chain options and the full line of replacement parts and chains for Kelly Conveyers.

Cornell 6819 MP Hybrid


Cornell MP-Series Pumps are designed to handle coarse abrasives while providing robust service life in a slurry pump. The oversize shafts, thick volutes, CD4MCA impellers, and other features allow it to operate in harsh conditions longer than a standard slurry pump. The MP series incorporates the unique pushed-out rectangular design features of the Cornell frame, letting you know it is a quality Cornell pump.

• White Iron impeller
• White Iron, adjustable wear plate, no wear rings
• Heavy ductile iron castings, heat treated available
• Designed to pump abrasive material

Cornell Manure Pumps


We offer a wide range of manure and slurry handling pumps. The most demanding model for umbilical slurry spreading systems is the 4NHTB. For higher flows, lesser fuel consumption and thousands of running hours you need a Cornell manure pump. Featuring a 100% mechanical priming system, for quick prime and re-prime, even from dry conditions.

• Air handling capacity 50 m3/hour
• “Easy clean” float box fully galvanized
• Swing-Flex non-return valve

Available: 4NHTB, 6NHTB, 6NHTB-19. 6NHTC with 3″ wide impeller for increased solids handling and pump capability over 6NHTB-19 model

Doda BioGas Mixer


• Stainless steel construction with an oil bath driveline
• 3 blade propeller with optimized profile which allows for greater mixing power
• BG80 and BG 500 models powered by an electric motor with a reduction gear to rotate at either 80 or 500 RPMs.
• Roof or wall frame mounting
• Mixing arm is engineered to swing, up and down, left and right; to fit customized mixing effects

Doda Horizontal Pumps


• Available in a variety of sizes
• Patented Doda chopping system
• Higher pressure output
• PTO or Electric drive
• Also available in vertical mount

Doda Vertical Pumps


• Patented Doda chopping system
• 3”,4”,5”,6”, and 8” pumps
• PTO, hydraulic and electric drive options

DariTech Decanter Centrifuge


• Excellent nutrient recovery and phosphorus reduction.
• High solids capture for clean lagoons.
• Cleaner flush water & reduced water usage.
• Lagoon water usable for pivot irrigation.
• Full-length tungsten carbide tile scroll protection.
• Heavy-duty plow and wipers.
• Corrosion-resistant.
• Low horsepower.
• Easy to operate and maintain.

Electric Submerse Agitator


• Available in 10, 15, 20 and 25 HP.
• Overheat protection with thermal circuit breaker.
• Propeller can turn in either direction, pushing or pulling action.

120/150/200/250 Gallon Westwaard Calf Milk Pasteurizer


• Pump Agitation and Dispense System
• Automated Pasteurization Cycles
• Re-Heat & Pre-Cool Options Standard
• Automated C.I.P. System
• Peristaltic Chemical Pump
• Large PLC Screen Provides Information Throughout Cycles
• Requires Integration with Hot Water Heater for Heating Cycles
• 20 Amp 240 VAC 1 Phase 4-Wire

40/60/90 Gallon Westwaard Calf Milk Pasteurizer


• Pump Agitation and Dispense System
• Automated Pasteurization Cycles
• Re-Heat & Pre-Cool Options Standard
• Programs for Colostrum Pasteurization and Colostrum Thaw for Frozen Bags
• Automatic C.I.P. System
• Optional Peristaltic Chemical Pump
• Large PLC Screen Provides Information Throughout Cycles
• Electric Heating
• 40 Gallon – 40 Amp 240 VAC 1 Phase 4-Wire
• 60 Gallon – 50 Amp 240 VAC 1 Phase 4-Wire
• 90 Gallon – 70 Amp 240 VAC 1 Phase 4-Wire

20 Gallon Westwaard Calf Milk Pasteurizer


Built with the same expertise and quality as our larger pasteurizers, this pasteurizer also includes our fully automated PLC control and heavy-duty stainless steel construction. Our 20-gallon pasteurizer is a great size to be used as a colostrum pasteurizer as well!

• Pump Agitation and Dispense System
• Automated Pasteurization Cycles
• Re-heat & Pre-cool Options Standard
• Programs for Colostrum Pasteurization and Colostrum Thaw for Frozen Bags
• Manual Wash
• Large PLC Screen Provides Information Throughout Cycles
• Electric Heating
• 30 Amp 240 VAC 1 Phase 4-Wire

BeddingMaster In-Vessel Manure Composter


Bedding Master uses proven composting techniques to quickly turn separated manure solids into valuable bedding or compost. Separated solids fed into the BeddingMaster at 35% dry matter. Fixed openings on the input and discharge increase throughput by up to 50%. Ample air supply is ensured by the pre-installed blower increasing bacteria activity and in-vessel temperature.


Available in 6’ x 20’, 6’ x 32’, and 8’ x 40’

DariTech Sand Cannon


Daritech’s Sand Cannon separator available from our Auburn company produces, by far, the highest quality reusable bedding sand in the industry! With low energy use and less wear and tear you can keep your sand from scrape or alley vac manure while sending water to your lagoon with low solids and no sand.

​Along with our choice of manure separators and augers, we offer our DT360 separators with our unique hybrid screen. The DT360 sand separator from CFS in Auburn provides high-quality process water and high fiber capture, giving the dairymen clean sand, clean fiber, and clean lagoons.

We also offer a full line of pumps to complement your Sand Recovery System, providing excellent value with heavy-duty, high wear resistance for pumping recycled water and sand-laden manure.

In addition, we provide custom process control systems to meet the varied needs of system designs.

DT Manure Roller Press


• High production press for use with 2-DT360’s or DTX.
• Airbag to create a dryer product.
• Heavy-duty oversized bearings and shaft.

• Designed for DT360.
• Individual airbag pressure to control dryness and feed speed between set of rollers.
• Expected dry matter 30-35%.
• Product is usable as green bedding.

DTX Manure Separator


• Available in 24”, 48”, and 96” models.
• Stainless steel construction.
• High solids capture rate.
• Ideal for water make up in sand separation systems.
• Low maintenance.
• Gear-motor drive, made in the U.S.
• Use with a variety of roller press sizes depending on the use for solids.

DT360 Manure Separator


• Low HP operation
• 3” Stainless Steel tubular frame construction
• Solid nylon idler wheels
• Built in bypass system
• No daily cleaning required
• 3/16”, 1/8”, 1/16” punched screens available
• Mesh and hybrid screens available
• Gearbox made in the U.S.
• Used in primary and secondary separation for high-quality flush water

EYS Screw Press Manure Separators


Whatever your screw press manure separation needs, Daritech’s EYS separators can get the job done.

7.5 HP, up to 800 cow capacity, ideal for green bedding and designed to feed Bedding Master in-vessel composter.

7.5 HP, up to 1,200 cow capacity, ideal for green bedding.

15 HP up to 1,800 cow capacity, ideal for green bedding.

Doda 780 Heavy Duty Screw Press


• Stainless steel construction with user-friendly side doors to inspect inside of machine
• 8mm thick loading chamber to absorb additional torque
• Oversized planetary drive with automatic greasers
• Additional weights for added squeezing pressure
• Stainless Cast, and Stainless Steel Cast Fat augers available
• Heavy-duty wedge wire screens for exceptional separation available at .5mm, .75mm, or 1mm widths
• Cantilever arms with moveable weights to adjust solids dryness
• Chopper knives (7) destroy foreign items trying to enter unit
• Tungsten-Carbide seal system and warning to keep weep hole assures no liquid contamination of planetary drive