All Products
Doda AFI 35L Pumps
- Patented Doda chopping system
- Ideal for irrigation or manure injection
- Tungsten-Carbide mechanical sealing system
- Variety of gear ratios available in 540 or 1000 RPM
- Pumps can be sized for PSI and GPM required
- Standard galvanized 6" suction cone (8" available) with internal check valve
Doda AFI 35 HD PTO Pump
- Heavy Duty oil cooled gearbox with 2.73 gear ratio (2730 impeller RPM)
- Suction cone has built in oil reservoir with filter to recirculate oil through gearbox
- 6" or 8" suction cone with internal check valve
- Pump comes standard with belt driven power primer, HD large 1000 spline PTO shaft, and 2-wheel trailer.
- Tungsten-Carbide mechanical seal system
Used Frac Tank
- 5th Wheel Frac Tank
- 8' x 40'
- 6" Connections
Please contact our sales department for more details.
Peecon TMR Feed Mixers
All the Biga feed mixers available af CFS in Auburn are equipped with unique Peecon Double Action augers. These augers ensure fast and homogeneous mixing, so that any livestock can be provided with precise and homogeneously mixed rations. Peecon also offers modified augers for special products and rations.
Our range of Biga feed mixers is divided into the standard models (“Generation III” models) and the Future models. The Future models have a special tub design and a whole package of extra features. The patented Future mixing tub provides additional protection against boiling over, especially in the case of dry rations. And thanks to its unique shape, it has extra robustness and stability. Furthermore, the Future models are equipped as standard with an electronic weighing system that can be used with feed management software. The adjustable discharge chutes are made with stainless steel for even better delivery of the feed. The extra thick augers are made from high-tensile steel and have an extra discharge unit for an even flow of rations during unloading. The Future design features are available with all the “Generation III” Biga models.
Our range consists of feed mixers with 1 auger (Eco), 2 augers (Twin), 3 augers (Mammoet) and 4 augers (Mega Mammoet). The Plus models are fitted with a discharge belt, which can be placed at the front or the back of the machine. The Wide Body models have side walls that slope outwards at an angle of 2.5° or 5°; this way, the width at the bottom and the height of the machine are the same, but the volume is increased.
In addition, various special versions of feed mixers are available from CFS in Auburn for different applications or situations, such as our Biga Rapide (self-propelled), Biga Lowliner (low center of gravity design), Biga Twin Pacman (self-propelled and self-loading), Biga (Twin) Scoop (with tailgate) and many other models.
-The rapid homogeneous mixing leads to healthy cows and high milk yields
-Limited power requirements due to innovative solutions
-Very long life and low maintenance through the use of high quality materials
-Excellent value for money
-Weighing system with the highest precision rating, awarded the DLG quality label
-Already more than 8,500 satisfied users
-Worldwide sales network and spare parts supply
-Long economic life, low depreciation
-We can customise the feed mixers to suit your specific needs
Chisel Point Sweeps
-Shown with optional 3-1/2" tube and clip (2-1/2" hose fits inside).
-8" Wing width.
-Designed for higher rates (5,000 - 10,000 gallons per acre).
-Lifts the soil than 1-1/4".
-Vertical portion 1" thick at the lower rear to create a wider slot to facilitate the filling of the soil
cavity created by the wings.
-The 8" Hi Rate Sweep parts the soil more and creates a larger soil cavity than the 8" Low Rate Sweep
to contain the liquid.
-Shown with optional 4" tube and clip (3" hose fits inside)
-12" Wing width
-Designed for higher rates (10,000 - 15,000 plus gallons per acre)
-Lifts the soil less than 1-14"
-Vertical portion is 1" thick at the lower rear to create a wider slot to facilitate the filling of the soil
cavity crated by the wings.
-The 12" Hi Rate Sweep parts the soil more and creates a larger soil cavity than the 8" Hi Rate Sweep
to contain the liquid.
Dietrich Complete Sweep/Rotary Injection System
-Easy change over in the field between Sweep & Rotary Injection
-13 Wave Swivel Conical Bladeto widen slot for nutrient placement
-Unique Swivel-mounted Conical Coulter Blade enters the soil parallel to the direction of travel and
exits moving soil laterally resulting in maximum depth penetration for maximum gallons per acre. ----Does not create excesive side load on mounting or tank.
-Individual depth adjustment
-Option to run Coulters deeper behind tank tires in muddy conditions
-Designed for speeds up to 8 MPH
-Available 8" Low Rate, 8" High Rate, or 12" Hi Rate Chisel Point Sweeps depending on your desired
gallons per acre
-Wing drop or 3", 3-1/2", or 4" OD Tube available on all Chisel Point sweeps
-4" Rotary Injection Discharge Tube & Bracket for use with 2-1/2" & 3" hoses.
This complete injection system includes the Dietrich Series 70 Assembly with 800# Down Pressure Coulter Assembly, Coulter Mount, 13 Wave Swivel Conical Blade, 4" Rotary Injection Discharge Tube & Bracket, your choice of Chisel Point Sweep & Discharge Tube, and the Dietrich Clozr with choice of Notched Blades.
The vertical tillage industry does no yet know what the maximum gallons per acre will be in wet soil conditions. Wet soil tends to have a plastic characteristic. This condition creates minimal cavity size plus wet soil does not soak up excess liquid.
To get a better perspective of the liquid volume, imagine a circle of liquid 3.8" in diameter will be created in the direction of travel at a 10,000 GPA rate. At 5,000 GPA the circle of liquid is 2.7" in diameter. Now it is possible to inject up to 15,000 gallons or more per acre in any soil condition using Rotary Injection for lower gallons per acre and easily convert to Sweep Injection for wet or compacted soil conditions that limit gallons per acre.
Dietrich Conical Blade Rotary Injector
-Spacing from 30" to 18"
-Fits 6" x 4" & 6" x 6" Tool Bar
-Conical blade enters the soil in the direction of travel ahead of the spindle and moves soil laterally
behind the spindle to widen the opening.
-Heavier down pressure spring
-Coulter swivels reducing side loading
-All service/adjustments accomplished with 1/2" impact wrench
-6" Blade rock clearance to prevent breakage
-Cup washers protect all seals
-Dual roller bearing for longer life, not single row ball bearings
-All hi tensile steel thoughout for weight reduction.
-Weight-forward design to avoid weight transfer from drawbar
-2 coat black enamel baked paint
Dietrich Series 70
-Attaches to a 4" x 6", 6" x 6"or 7" x 7" tool bar
-No daily greasing – Only end of season shank pivot greasing
-Snap pin adjust coulter –No set screws
-800# coulter down pressure spring assembly - Most others range from 200 - 350# down pressure
-22 - 1/2" diameter coulter -Not 20"
-Auto reset with heavy duty 1400# reset force - Not spring bundle
-1-1/4" x 2" edge bent steel shank- Not 1" x 2"
-Narrow 1/2" sweep shank - Sweeps lift the soil less than1-1/4"
-Hi carbon, special bar quality, cast steel chisel point sweep with front hi chrome casting and heavy, --Abrasion-resistant hard surfacing on the wings
-Separately replaceable sweeps & tubes
-Cup washers protect all seals
-Series 70 Chisel Point Sweeps are designed to penetrate frozen soil.
-1/2" thick Chisel Point Sweep Shank combined with 62 degree swept back wings results in
minimum soil disturbance and allows shallow placement of nutrients.
-The sweeps are designed with thin Vertical Portion Hi Carbon steel to minimize soil disturbance at
high speeds.
-To prevent breakage, the sweeps are attached to a 1-1/4" x 2" edge bent alloy steel shank to allow
side movements when striking rocks.
-Standard 3", Optional 3-1/2" & 4" OD tubes with clip, and Wing Drop Tube available on all sweep
sizes.
-Easy snap pin depth adjustment on coulters
-Consistent coulter depth with 800# down pressure coulter assembly
-Longer wear & better cutting action with larger coulter blades and special edge detail
-Requires only end of season greasing on shank pivot
-Since Hog Manure is worth approximately $48 & Dairy Manure $31 per 1,000 gallons at current pricing, it is a valuable resource that should be used in the most efficient way possible.
-All agronomists agree nutrients should be placed in the
GREEN ZONE 5"–6" deep for maximum yield.
-Surface soil dries. Plants don't get nutrients in dry soil.
-Weeds germinate easier in fertile surface soil.
-Injecting deeper than the GREEN ZONE creates less nutrient availability and increases fuel consumption.
Mainline Hoses
Design
Thermoplastic polyether based polyurethane (TPU)
State of the art “through the weave” extrusion technology.
Heavily reinforced and stabilized weave, using high tenacity polyester filament yarns.
Excellent adhesion between cover/lining and the weave.
Advantages
Full diameter recovery after pressure release.
Excellent hydrolysis and fungus resistance.
Resistance to a wide range of chemicals.
Temperature range -50 to 75 ºC (pure water)
Excellent UV, Ozone and weathering resistance.
Features
Lightweight and easy to deploy
Ultimate abrasion and puncture resistance
High diameter and extension stability
Minimum snaking of pressurized hose
Available in 660' lengths or cut lengths (subject to availability).
Nitrile Rubber Mainline also available upon request.
Pressure: 250 psi
Burst: 650 psi
End Tensile Strength: 44,000 lbs.
Wall Thickness: 0.15"
Dry Weight: 1.34 lbs./ft.
Pressure: 200 psi
Burst: 610 psi
End Tensile Strength: 81,500 lbs.
Wall Thickness: 0.17"
Dry Weight: 2.15 lbs./ft.
Pressure: 200 psi
Burst: 520 psi
End Tensile Strength: 101,200 lbs.
Wall Thickness: 0.17"
Dry Weight: 2.85 lbs./ft.
Kifco Pumps
Kifco offers a wide range of pump options to accomodate our Water-Reels. Our Booster Pumps provide additional pressure when needed to maximize your traveler's performance. Our primary pumps include air-cooled and engine driven and built to match many B-Series and Ag-Rain Reels. Kifco packages are EPA emissions compliant for irrigation use and our standard models are specifically sized to match our Water-Reels. Custom built packages are also available for most any application. Our Slurry and Waste-Water Pumps are custom built packages that can be ordered for most any application. They are single-stage, centrifugal pumps with mechanical seals and integrated gearboxes. Our PTO Pumps are driven from your tractor's PTO shaft with maximum output of 540 to 1000 rpms. They are offered as bare pumps, mounted on a cart or 3-point frame or can be ordered fully fitted.